Once there is no air remaining in the cartridge you can adjust the level, referring to the table below. To get the correct oil level in the cartridge side, you must bleed the air while you are pouring the oil. Keep highly attention about theĬorrect oil level, in both leg (cartridge and spring), follow the datas mentionned below in the table. On the same note, do not power wash the fork! It will only push the mud inside the fork and get it stuck between the stanchion and the seals.Īn oil change with the Idylle fork consists in changing the oil bath in each leg. It is very simple to clean your fork : wipe off the stanchion with a clean rag and then slightly lube the stanchion (with silicon based product). It is compulsory to clean your fork every time you use it, without waiting ! Nothing’s worse for your fork’s seals than dry mud. All you have to do is to undo the bleeding screw and put them back on, no need to compress the forks. We recommend to bleed your fork every 5 rides in racing use or every 10 rides in recreationnal use. Bleeding your forks on regular basis will reduce the pressurising effect that always happens with those forks. Idylle is fitted with a bleeding screw on the top of the right stanchion.
